|
|
Dual Wheel 'Simulator' Hubcaps-Wheel Covers-Liners
For Ford Trucks and Vans
Ford Front Dual Wheel covers
![]() |
Rear Dually Hubcaps--Wheel Liners![]() |
| Phoenix Stainless Wheel Liners
are made of high quality polished T304L
alloy Marine Grade stainless for long corrosion-free life. T304 Stainless 18% Chrome and 11% nickel, is very 'white' and matches any other chrome plated parts of your vehicle. What we need to know for correct fitting: Chassis Make, Model and Year, Wheel Diameter (& Width), Number of lugs and Hand holes The Accuride Wheel Number is most definitive for the best product match. It is usually stamped on the front wheel between a couple of lug holes, but may be found anywhere on the wheel. The chart below is a partial list of products available for Ford. Click on the Logo Links under Type for more information on that product line. Click on the Model Number Link for more information and ordering. |
|
Call 888-526-0273 Toll-Free to order (Seattle time)Single Wheel Simulators Stainless "Big Rig" look for your Ford Single wheel Truck Valve Stem Extension Hose Kits Make filling and checking pressure much easier Trailer Wheel Simulators The best Stainless Trailer Wheel covers |
E350 Van Chassis Ambulance with DOTLiners |
| Wheel Dia |
Lugs | Hand Holes |
Fits: |
Years | Accuride Wheel # |
Type | Price |
P-GQ64 |
16" | 8 | 4 | Universal 2wd 4wd Stainless 16" 4 Hand Holes Push-On |
74+up | QuickLiner |
R | $124.50-4 |
P-GQ62 |
16" | 8 | 8 | Universal 2wd 4wd Stainless 16" 8 hand holes Push-On For Ford E Series Van Chassis |
74+up |
QuickLiner |
R | $174.50-4 |
P-SLU168 Click for More Info |
16" or 16.5" x6" |
8 | 4 | F350 2wd E350 Van 2wd Under-lug with Pound-on hubcovers |
68-98 71-91 |
|
$134.50-4 |
|
Ford Specific Fit
Phoenix Brand - Factory in TN
Picture at right shows F450 Tow Truck with DOTLiners |
![]() |
|||||||
| Click for Model # | Wheel Dia |
Lugs | Hand Holes |
Fits: |
Years | Accuride Wheel # |
Type | Price |
| P-NF98 | 16" | 8 | 8 | E350-E450 Van 2wd Attach with Stud Extenders and Jam Nuts [Nut=PNF98LNT; STX=PNF10STX for 9/16" studs] Uses AML1 Valve Extender Kit |
92-07 | 28618 |
|
$209.50-4 $139.50-F $179.50-R |
| P-NF11 | 16" | 8 | 8 | E350-E450 Van 2wd Liners are the same as NF98, but use 9/16" jam nuts directly onto studs (Jam Nut PGDSF92LNT) NF11 Discontinued--Upgraded to NF98 |
92-07 |
|
| P-GDF16 | 16x6.0 | 8 | 4 |
F350 2wd 4wd Uses AML1 Valve Extender Kit |
03-04 | 29223 29746 29583 |
|
$209.50-4 $139.50-F $189.50-R |
| P-GDF17 | 16x6.0 | 8 | 4 |
F350 2wd 4wd Jam Nuts directly onto 14mm studs 170 mm BC (=6.7") |
99-02 | 29223 29746 29583 |
|
$189.50-4 $139.50-F $189.50-R |
| P-GD816 | 16x6 | 8 9/16 studs |
4 | F350 2wd 4wd E350 STX Screw onto 9/16" studs 6.5" BC |
85-98 85-91 |
28371 28512 29316 29399 29580 |
|
$214.50-4 $139.50-F $179.50-R |
| P-NF23 |
17 x6.5 |
8 | 4 |
F350 2wd 4wd Uses AML2 Valve Extender Kit |
05+up | 29837 |
|
$239.50-4 $169.50-F $189.50-R |
| P-NF10 | 16" | 10 | 4 |
F450 Super Duty 2wd 4wd BC=7.25" |
88-98 |
28375 28513 28671 |
|
$219.50-4 $149.50-F $209.50-R |
| P-NJ6 | 19.5" | 6 | 6 | F600 This Item Has been Discontinued Listed here for Parts reference only |
28179 |
|
P-QC1019Click for More Info |
19.5 | Any | Universal Fit 19.5"Ring Mount with 8 holes Fits Any 19.5" Dual wheels |
|
$284.50-4 $179.50-F $229.50-R |
| P-NF19 | 19.5 x6.00 |
8 | 5 |
F450-F5502wd 4wd Coarse thr, 14mm stud 2.0 pitch 22mm flange nut **Check to make sure 6" wheel width** **Does not fit wider RV wheels** Uses AML2 Valve Extender Kit |
99-02 |
29186 29745 29584 |
|
$239.50-4 $169.50-F $209.50-R |
| P-NF19* Modified |
19.5 x6.75 |
8 | 5 | Fronts fit. Phoenix will modify the rear hardware (add STX & JNT), user will need to enlarge the holes with a small grinder | 29236* StudPilot |
|
Call for price |
| P-NF22 | 19.5 x6.00 |
8 | 5 |
F450-F550 2wd 4wd Fine thr, 14mm stud, 1.5 pitch 22 mm flange nuts Attaches with jam nuts directly onto studs if long enough (3/4") E550 2wd **Does not fit wider RV wheels** Uses AML2 Valve Extender Kit |
03-04 2003 |
29745 29584 29521 29186 |
|
$229.50-4 $169.50-F $199.50-R |
| P-NF20 | 19.5 x6.75 |
8 | 5 |
F450-F550 2wd 4wd This Item Has been DiscontinuedListed here for Parts reference only |
99-02 |
|
$339.50-4 |
RW-1901-336CK |
19.5 x6.75 |
8 | 5 |
F53-F450-F550 2wd 4wd Cone Bottom Nuts, Coarse thread **Wider RV wheels** |
09-02 |
29186 29236* 29745 29584 29585 29736 |
|
$559.50-4 |
| P-NH8494 | 19.5 x6.75 x7.5 |
8 | 4 | F650-F750 93-03 F600-F700 90-98 20mm studs, Hub Pilot 30mm nuts Uses AMH1 Valve Extender Kit |
93-03 90-98 |
28532 28612 28680 |
|
$294.50-4 $219.50-F $289.50-R |
| P-NH8495 | 19.5 x6.75 |
8 | 4 | F650 *22mm studs 33mm nuts Attaches with jam nuts directly onto studs if long enough (3/4") Uses AMH1 Valve Extender Kit |
04+up | 28466 28532 28612 28680 29716 29719 50180 |
|
$294.50-4 $219.50-F $289.50-R |
| P-NF25 | 19.5 x6.00 |
10 | 5 | F450-F550
LCF500 & LCF600 uses jam nuts that bolt directly to the studs |
05+up 2006 |
29839 29883 29884 |
|
$249.50-4 $169.50-F $219.50-R |
| P-NF25* modified |
19.5 x6.75 |
10 | 5 | F53, F450-F550 Fronts fit. Phoenix will modify the rear hardware (add STX & JNT), Customer will need to enlarge the holes with a small grinder Uses AML2 Valve Extender Kit |
|
Call for price |
| P-NH5092 | 19.5 x7.5 |
10 | 5 | F600/650/700/800 airbrake 22mm Studs 33mm Lugnuts Uses AMH1 Valve Extender Kit |
92+up | 29195 |
|
$379.50-4 $279.50-F $349.50-R |
| P-QC895 | 19.5 | Any | Gutter Block Mount with 8 holes Fits Any 19.5" Dual wheels This Item Has been DiscontinuedListed here for Parts reference only
|
| P-N50075R | 20x7.0" 20x7.5" |
10 | 5 |
F600-700-800 (Older Trucks) Stud Piloted (2-piece wheels) This Item Has been DiscontinuedListed here for Parts reference only |
|
| P-N50085R | 20x8.0" 20x8.5" |
10 | 5 |
F600-700-800 (Older Trucks) Stud Piloted (2-piece wheels) This Item Has been DiscontinuedListed here for Parts reference only |
|
|
Phoenix Products Installation Instructions: |
Example (N29506) DOTLiner Hardware |
![]() |
Why are these called "Simulators"? These wheel covers
simulate chrome plated dual wheels, but are MUCH more affordable.
Phoenix USA, Inc. warrants the stainless steel wheel simulators it markets to be
free from manufacturing defects for a period of 3 years from initial sale to the
initial purchaser. Any potential claim should be initiated by contacting the
warranty department at Phoenix USA, Inc. to request a Returned Goods
Authorization number so that the defective item only can be returned to Phoenix
USA, Inc. for inspection and evaluation. If it is determined that the part in
question was, in fact, defective, the defective part will be replaced at no
charge.
| Phil, I received the (Phoenix) wheel simulators today &
installed them. Phoenix makes a nice product. Thank you again. Michael C,
Hicksville NY Hi Phil: The Phoenix simulators arrive yesterday, they fit perfect and look super. Thanks Wayne L, Alamogordo NM Thank you for getting to this order (Phoenix Dual Wheel Simulators, special order) out so quickly. I will continue to use your company for any future needs because of your great customer service. Jeanne P Klamath Falls OR Received everything in perfect condition. They (N816UL 16 inch Bolt-On Stainless Dually Simulators) really look nice on the motorhome. Thanks a lot for the good service and the awesome price!! Gary D Email your pictures and we will post yours on the website too!! |








