> Motor Home Hubcaps
> Motorhome RV Chrome Hubcaps |
Model AL Universal Fit Motor Home Hubcaps
Chrome ABS Plastic or Polished Stainless RV Wheel covers
Our Motor Home Wheel covers are ready for a fast and easy push-on installation. These RV chrome wheel covers are made of either polished T304 Stainless Steel or triple-chrome plated ABS plastic with metal retaining clips for a better fit and superior retention.
Fronts and Rears are the same, bulge convex outward
If you prefer the Dually look (fronts bulge out and rears bow in) go to our Dual Wheel Simulators
Chrome ABS Plastic Motorhome RV Hubcaps |
  Please Read all the fine print details before ordering. Model AL160P chrome ABS plastic fits 16" wheel $109.50 per set of 4
|
Polished T304 Stainless Steel Motor Home RV Hubcaps |
   Please Read all the fine print details before ordering. Model AL160SS Polished Stainless fits 16" wheel $154.50 per set of 4
|
The picture below compares the ABS Plastic to the Stainless Motorhome Hubcaps. Note the Stainless model (right) has a slightly taller profile, resulting in the nut caps extending about one inch further out from the steel wheel.  Be sure to check and confirm your rim size before ordering. Do not measure rim size, read it off the tire. If you are unsure, click FAQ for help. |
 |
Phil - I appreciate the advice and guidance on the Motor Home RV hubcaps for
my Sprinter - Great service and a great product. Mike O, Flat Rock, NC (Sprinter with 16 inch single wheels) |
 |
Phil - Thanks for the advice on the Stainless Motor Home Hubcaps. Irene K, Sanborn NY |
|
The (AL160SS) wheel covers came as ordered and on the date predicted. Great
Job! Thanks Phil Jim L, Livermore CA Thank you for your quick response in sending the order to me. I was pleasantly surprised when the FedEx guy delivered the package on Friday. The (8813s) hubcaps are first quality in my opinion and I will definitely use your company again if it becomes necessary. Thank you! Rhonda F, Richmond VA Hi Phil: I did not get a chance to put the (925s-14) hubcaps on until today. They are every bit as good as the factory originals, and I installed all 4 simply in less than a minute. They look great, just like the factory ones. Jeremy N, Seal Beach, CA Hi Phil: Thank you getting back to me regarding this issue. Due to your excellent customer service (staying in touch and various offers to accommodate the customer's need for resolution), I WILL recommend your website to anyone who may be in the market for wheel covers, etc. In addition, I will also keep you in mind in case I ever need replacements or would like to change the look of my car sometime in the future. Thanks again for your prompt service and hope you have a good day! (944c-15 hubcaps) Best Regards, David C, Taunton MA |
Be sure to check and confirm your rim size before
ordering.
Do not measure rim size, read it off the tire.
If you are unsure, click
FAQ for help.
Visit our Hubcaps Installation pages for tips on making it easy, doing it right.
Note: Since Replica Wheel covers are copies, they do not show the
manufacturer’s logo. Logos are the legal trademark of the manufacturer, as such
it would be Trademark infringement to include them on Replica hubcaps.
Hubcaps Installation: Proper installation is easy and should not
require significant effort or force. Replica Hubcaps use a spring steel
retention ring pushing plastic or metal clips out against the steel wheel, to
hold it in place.
Locate the Hubcap to its proper position, align the hubcap notch with the valve
stem. Hold the hubcap parallel to the rim all the way around and apply even
pressure with both hands so the hubcap is not tilted away from the rim at any
point. Increase the pressure evenly, side to side, top to bottom, and the
retention clips will begin to slide into the rim. Try not to let the hubcap get
too much away from parallel to the wheel as you ease it into place. You may need
to gently punch it in with the heel of your fist. A rubber hammer should not be
necessary. Proper installation results in the outer edge of the hubcap fitting
firmly against the steel wheel all the way around. If it does not seat all
around, do not drive with it. This is a sign of interference by tall lug nuts,
hub, or an unusual wheel. The hubcap should not able to be pulled off using only
your two bare hands. If you can pull it without tools, check our tips to
Tighten Loose
Hubcaps.
Many auto dealers, mechanics, and enthusiasts across the USA certify to the
quality of AutoAmenity products and services. Our competent advisors are ready
to assist you in choosing the best style and quality hubcaps for your vehicle.
We carry Replica and Custom hubcap designs to suit any taste, make, or model of
car. You can choose hubcaps to make your car look as natural or as flashy as you
like.
Our hubcaps are made of durable ABS plastic that will give you years of good
looks without the denting or rusting that steel hubcaps of the past were prone
to. Each hubcap presses easily onto your standard steel wheel. To
determine the right size hubcap
for your wheels, read it off the tire.
Secure Transactions
